Trade supply

Aluminium Trade Supplier for Altrincham, Hale and Bowdon

VitrineAlu fabricates thermally broken aluminium in Haydock, St Helens, and supplies the installers, builders and contractors working across Altrincham, Hale, Bowdon and Hale Barns. You send drawings and sizes, we specify the route, quote and fabricate finished units for collection or delivery into the area. See our aluminium product range.

Trade quote Open a trade account

Lead time confirmed at quote, never a guess. Pricing per project, never a stock figure.

Aluminium Trade Supplier for Altrincham, Hale and Bowdon, aluminium fabricated and supplied by VitrineAlu

Trade supply, drawing-ledSend drawings or sizes and we specify and quote the right route.

Fabricated in HaydockCollection from the Haydock unit, or delivery within about an hour, roughly forty miles, across the North West.

Product-tested routesPAS 24 routes, BS EN 14351-1, UKCA / DoP support.

Built for high-spec Trafford projects

Altrincham, Hale and Bowdon carry some of the most demanding residential work in the North West. Large rear extensions on the leafy plots around Hale Barns, glass-led remodels in the Devisdale conservation area, and substantial new builds off Ashley Road all push aluminium hard. The expectation is slim sightlines, big panes and a clean finish that holds up on a premium project, with the energy numbers to match.

We fabricate to suit that brief. VitrineAlu works to the trade and never installs, so the installer or main contractor stays in control of the programme and the client relationship. You get a finished, fabricated unit made in Haydock, specified properly for the opening, and ready to fit. That keeps responsibility clear on the kind of high-value job where it matters.

The aluminium trade specifies most in this area

The bread and butter on Altrincham and Hale extensions tends to be wide glazing onto the garden, paired with windows that carry the same sightline and finish through the rest of the house. We supply the full range so a project reads as one consistent system.

Aluminium bifold doors for open-plan kitchen extensions, with thermal performance from a Uw of 0.9 where specified. See our aluminium bifold doors.
Slim-framed sliding and patio doors for large fixed views onto the garden, from a Uw of 1.0 where specified. See our aluminium sliding doors.
Casement windows from a Uw of 0.85, and tilt-and-turn from a Uw of 0.66, both where specified, to keep the elevation consistent.
Steel-look internal doors and screens for the open-plan layouts these clients ask for.
Curtain walling, roof lanterns and flat rooflights where a remodel needs daylight from above.

Specification that holds up on premium work

On projects of this value the spec gets scrutinised, so we keep ours honest and documented. Glazing options run from 22mm to 58mm, with acoustic builds to Rw 46 dB where a road-facing elevation or a flight path near Hale Barns calls for it. PAS 24 security routes are available, and everything is fabricated to BS EN 14351-1, with curtain walling to BS EN 13830.

VitrineAlu is a CAB member and supports UKCA marking and Declarations of Performance, so the paperwork your building control officer or specifier needs comes with the units. Finishes are chosen to suit the project, from crisp contemporary blacks and greys to heritage-appropriate colours for the conservation pockets around Bowdon. Our guide to aluminium U-values sets out how the figures are reached.

Supplied from Haydock into Altrincham, Hale and Bowdon

Haydock sits a short run west of Trafford, so collection from our unit is straightforward and delivery into Altrincham, Hale, Bowdon and Hale Barns is part of the routine. Pricing is confirmed per project at quote and lead times are confirmed per finished unit, so you get real numbers to plan a programme around rather than a guess.

To get moving, send your drawings and sizes through our quote request, or open a trade account at apply for a trade account. If you are a homeowner in the area, we will point you to a vetted local installer via find an installer.

Common questions

Do you install aluminium in Altrincham, Hale or Bowdon?

No. VitrineAlu is a trade fabricator. We make and supply finished aluminium units from our Haydock facility and the installer, builder or contractor fits them. Homeowners in the area are referred to a vetted local installer through our find an installer page.

Where are the units actually made?

Everything is fabricated in-house in Haydock, St Helens, Merseyside. We then supply the trade working across Altrincham, Hale, Bowdon and Hale Barns by collection or delivery into the area.

Can you match the slim sightlines and big glazing these projects need?

Yes. The range is built for high-spec residential work, with slim-framed sliding doors, bifolds and large fixed panes, plus low U-values where specified, such as casement windows from 0.85 and tilt-and-turn from 0.66.

How do I get a price and lead time?

Send drawings and sizes through our quote request and we will specify the route and quote it. Pricing is confirmed per project and lead times are confirmed per finished unit at quote, so the figures you get are real for your job.

Do you supply the documentation for building control?

Yes. We fabricate to BS EN 14351-1, with curtain walling to BS EN 13830, offer PAS 24 routes, and support UKCA marking and Declarations of Performance. VitrineAlu is also a CAB member.

Completed North West new build with VitrineAlu anthracite aluminium bifold doors, windows and dormers — The frame disappears, the view does the talking.

Proof, not promises

Specified and made by people who have fitted it

Paul Fradley, Director and Technical Lead, has worked almost every role in windows and doors across more than twenty years: surveyed, fabricated on the floor, fitted on site, then ran the technical and operations side. He leads the spec on every project, so what we quote is what we fabricate.

4.5 / 5 from 20 Google reviews. Council for Aluminium in Building member. Tested to BS EN 14351-1 and BS EN 13830 where specified.

Work with us

Send the drawings. We specify, fabricate and hand it over.

Send drawings Open a trade account