Trade supply

Aluminium Trade Supplier for the Wirral

VitrineAlu fabricates aluminium in Haydock, St Helens. We supply the trade working across the Wirral. That's Heswall, West Kirby, Caldy and Hoylake. Send us the drawings for a high-spec job. We specify the route and quote it. Then we build finished units for collection or delivery. We supply the trade, you handle the install. See our aluminium product range.

Estimates go out within 24 hours, Monday to Friday. Lead time confirmed at quote, never a guess. Pricing per project, never a stock figure.

VitrineAlu brand graphic

VITRINEALU LTDCompany number 12927857.

Fabricated in Haydock, St HelensTrade-only supply from our own workshop.

Trade enquiriesSend drawings or sizes to discuss a quote.

Technical information notice. Website information is general trade guidance, not a certification, compliance statement, design calculation or order confirmation. Before relying on a figure or standard, request current evidence for the selected product route, size, glazing, hardware and project.

Built for the Wirral trade, fabricated in Haydock

We're not based on the Wirral and we don't pretend to be. VitrineAlu fabricates in Haydock, St Helens. We run supply across Merseyside and the wider North West from there. So installers, builders, main contractors and shopfitters get a fabricator within reach. We know the high-value coastal residential work the area throws up.

The way it works is simple. You send drawings and sizes. We specify the right thermally broken aluminium system. We quote it. Then we fabricate and supply finished units. You collect from Haydock or we deliver into the area. You manage your own install and your own client. We stay in the workshop. That keeps your margin and your relationship intact.

Wirral postcodes carry expectation. Slim sightlines, big spans of glass, low U-values. Finishes that still look right after a few winters. That's the brief we build to. It's the brief the trade keeps coming back with. That covers Heswall, Caldy and the West Kirby seafront.

Coastal exposure: weather ratings and finishes that hold up

The Wirral coast is exposed. Driving rain comes off the Dee and the Irish Sea. Salt-laden wind crosses Hoylake and West Kirby. Gable elevations take the full hit. Aluminium specified for a sheltered inland plot isn't the same product. A seafront elevation needs a different one. We spec accordingly.

Weather performance is set per opening. Where a job calls for it, we route to PAS 24 security. We quote against the relevant air, water and wind-load ratings under BS EN 14351-1. Whole-unit figures are confirmed at quote. Not guessed off a brochure. The trade fits big exposed spans on these plots. That detail matters more than it does two miles inland.

Finish is the other half of coastal longevity. Marine and coastal environments are hard on coatings, so we can specify finishes suited to salt exposure and talk through the right paint route for a seafront elevation versus a sheltered courtyard. The aim is a finish that still reads as high-end after the weather has had a go at it.

  • Air, water and wind-load ratings set per opening under BS EN 14351-1
  • PAS 24 routes where security is specified
  • Coastal-appropriate finishes for salt and wind exposure
  • Acoustic performance to Rw 46 dB where specified for exposed or roadside elevations
  • Glazing from 22mm to 58mm to suit thermal and acoustic demands

The range we supply across the Wirral

Most Wirral residential work lands on glass. Wide rear elevations open to a garden or an estuary view. Slim-framed sliding runs. Casement or tilt-and-turn windows to match. We fabricate the full range. We quote the best achievable spec per finished unit.

Heswall and Caldy plots take open-out garden elevations. Our aluminium bifold doors reach a Uw from 0.9 where specified. For an uninterrupted estuary or seafront view, use aluminium sliding doors. They hold a Uw from 1.0. The sightlines carry a big pane. Our aluminium casement windows reach a Uw from 0.85. Tilt-and-turn is available where the spec is tighter.

  • Aluminium bifold and sliding/patio doors
  • Casement and tilt-and-turn windows
  • Entrance doors and steel-look internal doors and screens
  • Commercial doors, shopfronts and curtain walling
  • Roof lanterns, flat rooflights and heritage ranges

Commercial and high-spec work

It is not all residential. The Wirral has its share of commercial and mixed-use schemes, and the trade fitting them needs a fabricator who can hold a curtain walling spec as confidently as a domestic bifold. We supply commercial doors, plus curtain walling fabricated to BS EN 13830. U-values for both are confirmed at quote. Our aluminium curtain walling page covers the detail.

We support the paperwork too. UKCA marking and Declaration of Performance support come as standard. That's where the project needs them. We keep the supply chain straight. If your specifier needs evidence, we have it ready. Not scrambling for it after the order.

Discuss U-values before you quote a client. The U-values guide is the quickest route. A trade application opens an account. Both are linked below.

Working with us

Opening a trade account takes a short application. It gets you straight to specification and pricing on real drawings. The process is plain. Drawings in, spec and quote out. Finished units supplied to your programme. Lead times and pricing are confirmed per project at quote. Never a number we can't stand behind.

Wirral homeowners, we don't sell to you direct. We'll point you to a vetted local installer who fits our aluminium. Use the find-an-installer route below.

To talk specs, read our guide to aluminium U-values. To start supplying, open a trade account. Homeowners, find a vetted installer.

Common questions

Where is VitrineAlu based and do you cover the Wirral?

We fabricate in Haydock, St Helens, Merseyside, and supply the trade across the Wirral including Heswall, West Kirby, Caldy and Hoylake. You can collect finished units from Haydock or we deliver into the area. We are a fabricator and trade supplier, not a Wirral-based installer.

Do you fit the aluminium you supply on the Wirral?

No. We fabricate and supply finished aluminium units to the trade. Installers, builders and contractors manage their own installation. If you are a homeowner, we will refer you to a vetted local installer through our find-an-installer route rather than selling to you direct.

Is your aluminium suitable for exposed coastal plots on the Wirral?

Yes. We specify weather ratings per opening under BS EN 14351-1, with PAS 24 routes where security is needed, and we can specify coastal-appropriate finishes for salt and wind exposure. Whole-unit performance figures are confirmed at quote so the spec suits the actual elevation.

How do I get a quote for a Wirral project?

Send your drawings and sizes. We specify the right thermally broken aluminium system, quote it, then fabricate and supply finished units. Pricing and lead times are confirmed per project at quote. Open a trade account to get started on real drawings.

What aluminium products do you supply to the Wirral trade?

Bifold and sliding doors, casement and tilt-and-turn windows, entrance and steel-look internal doors, commercial doors, shopfronts, curtain walling, roof lanterns, flat rooflights and heritage ranges. We quote the best achievable spec per finished unit, for example bifolds with a Uw from 0.9 where specified.

Verified business details

VITRINEALU LTD

Fabrication works
Unit 1 Nassau Business Park, Bahama Road, Haydock, St Helens, WA11 9FW

Work with us

You fit it. We make sure it lands correct, square and on spec.