Technical information notice. Website information is general trade guidance, not a certification, compliance statement, design calculation or order confirmation. Before relying on a figure or standard, request current evidence for the selected product route, size, glazing, hardware and project.
Trade supply
Aluminium Trade Supplier for St Helens
VitrineAlu is a trade aluminium fabricator in Haydock. Haydock is in St Helens. Not half an hour away, not down the motorway. In the borough. We make thermally broken aluminium windows, doors and glazed screens. We supply St Helens installers, builders, joiners and contractors. You send the drawings and sizes. We specify the right route and quote it. Then we fabricate the units, ready to collect. See the full aluminium product range we supply to the trade.
Estimates go out within 24 hours, Monday to Friday. Lead time confirmed at quote, never a guess. Pricing per project, never a stock figure.
VITRINEALU LTDCompany number 12927857.
Fabricated in Haydock, St HelensTrade-only supply from our own workshop.
Trade enquiriesSend drawings or sizes to discuss a quote.
Your fabricator is in the same borough
We supply the people doing the work, not the homeowner. An installer on a semi in Rainhill. A builder on a scheme in Newton-le-Willows. A joiner on a rear extension in Eccleston. A contractor fitting out a unit off the East Lancs. You're exactly who we fabricate for. You manage the install and the client relationship. We handle the aluminium.
The difference on a St Helens job is the distance. Our unit is in Haydock, off junction 23 of the M6. That's minutes from most of the borough. Collection is a short run, not a half-day. If a unit needs looking at, you can drive it over. A supplier two counties away can't offer that. Collection and delivery are confirmed per project when we quote.
The aluminium range we supply
We fabricate the full fenestration range in thermally broken aluminium, so most St Helens jobs can be sourced from one supplier rather than chasing three.
Whole-unit performance is strong where the spec calls for it. Bifolds carry a Uw from 0.9 W/m2K, sliding doors from 1.0, casement windows from 0.85 and tilt-and-turn from 0.71, all as starting points confirmed per finished unit at quote. Acoustic performance to Rw 46 dB is available where specified, which matters on the busier routes through the borough and on anything close to the M6.
Drawing-led quoting
Send us your drawings, a schedule or even rough sizes and openings, and we specify the right product route for the job. Glazing is accommodated from 22mm to 58mm depending on system, so we match the unit to your glass spec and the performance the project needs rather than forcing the job to fit one product.
Where security or compliance is in scope we quote to PAS 24 security routes and work to BS EN 14351-1 for windows and doors and BS EN 13830 for curtain walling, with UKCA and Declaration of Performance support. If you want to sanity-check sizes or thermal numbers before you send drawings, the maximum sizes guide and the U-values guide are a good start. Pricing is confirmed per project when we quote, never a stock figure.
When the spec is settled, send it through the trade quote request and we will come back with the route and the numbers.
Opening a trade account
Regular St Helens buyers work with us on a trade account. It keeps quoting and repeat orders quick once we know how you work. We're set up to supply trade properly.
Apply through open a trade account and we'll get you set up. One supplier for bifolds, sliders, windows and screens. Commercial work too, across your St Helens jobs.
Homeowners in St Helens
We do not sell direct to homeowners and we do not install, and that does not change because you live up the road. If you are a St Helens homeowner who has found this page, the right next step is our find an installer route, which points you to a vetted local installer who can survey, fit and look after the job. Your installer then sources the aluminium from us, so you still get the same fabrication and the same standards behind the units.
Common questions
Are you actually based in St Helens?
Yes. We fabricate in Haydock, which sits inside the St Helens borough, off junction 23 of the M6. Most other suppliers serving St Helens are shipping in from elsewhere. We supply installers, builders, joiners and contractors across the borough and the wider North West.
Can I collect from Haydock the same day?
You can collect from our unit in Haydock once the units are made, which for most of the borough is a short run rather than a trip. Whether a given order is ready on a given day depends on the job, so collection timing is confirmed per project when we quote rather than promised up front.
Do you sell aluminium windows and doors direct to St Helens homeowners?
No. We are a trade supplier and we never install, and being local does not change that. Homeowners are routed to a vetted local installer through our find an installer route, and that installer sources the aluminium from us.
What aluminium products can you supply for a St Helens job?
The full range in thermally broken aluminium: bifold doors, sliding and patio doors, casement and tilt-and-turn windows, entrance and steel-look internal doors, commercial doors, shopfronts, curtain walling, roof lanterns and heritage. See the product range.
How do I get a price for a St Helens project?
Send your drawings, schedule or sizes through the quote request and we specify the right product route and quote it. Pricing and lead times are confirmed per project, never a stock figure. Regular buyers can open a trade account.
Verified business details
VITRINEALU LTD
- Companies House
- Company number 12927857
- Fabrication works
- Unit 1 Nassau Business Park, Bahama Road, Haydock, St Helens, WA11 9FW
- Membership
- Council for Aluminium in Building member
- Phone
- 0330 133 3622
Work with us