Trade supply

Aluminium Trade Supplier for Wilmslow and Alderley Edge

VitrineAlu fabricates aluminium in Haydock, St Helens and supplies the trade working across Wilmslow and Alderley Edge. Send us your drawings and sizes and we specify the route, quote and fabricate the finished units. Collect from Haydock or take delivery into the area. We supply installers and builders, never the homeowner direct.

Trade quote Open a trade account

Lead time confirmed at quote, never a guess. Pricing per project, never a stock figure.

Aluminium Trade Supplier for Wilmslow and Alderley Edge, aluminium fabricated and supplied by VitrineAlu

Trade supply, drawing-ledSend drawings or sizes and we specify and quote the right route.

Fabricated in HaydockCollection from the Haydock unit, or delivery within about an hour, roughly forty miles, across the North West.

Product-tested routesPAS 24 routes, BS EN 14351-1, UKCA / DoP support.

Built in Haydock, supplied to the trade in Wilmslow and Alderley Edge

We are a trade fabricator based in Haydock, just off the M6, and Wilmslow and Alderley Edge sit a straightforward run away. That keeps the logistics simple for installers and main contractors running jobs across this part of the North West. You send the schedule, we fabricate, and the finished units are ready for collection from our Haydock unit or delivery into the area.

This corner of the North West carries a steady run of high-spec residential and refurbishment work, from large detached homes in Alderley Edge and Prestbury to barn conversions and rear extensions around Mobberley. The trade serving those projects needs an aluminium fabricator who turns drawings into properly specified, well-finished units without fuss. That is the job we do, and we do it for the installer, not over their head.

To be clear on how we work: VitrineAlu fabricates and supplies. We do not install or fit. The trade buyer manages their own installation, and that is exactly how installers and builders working these postcodes want it.

Aluminium for high-spec homes

The residential work in Wilmslow and Alderley Edge tends to ask for big glass, slim sightlines and low U-values, and that is squarely what aluminium does well. We fabricate thermally broken systems across the full residential range, and we pick the route to suit the opening rather than forcing one product to do everything.

Where the specification calls for it, we can quote tighter whole-unit figures and confirm the thermal performance per finished unit at quote. Glazing options run from 22mm up to 58mm, and acoustic glass to Rw 46 dB is available where a plot near a busier road or the railway needs it.

Aluminium bifold doors with Uw from 0.9 where specified, for wide rear openings onto the garden
Slim aluminium sliding and patio doors with Uw from 1.0, for large panes and minimal frame
Aluminium casement windows with Uw from 0.85, in finishes to match the elevation
Tilt-and-turn windows to Uw from 0.66 where the spec is pushing hard on thermal performance
Steel-look internal doors and screens for open-plan ground floors and glazed partitions

Commercial and architectural supply

Alongside the homes, the trade around Wilmslow handles retail units, offices and the kind of architectural glazing that goes with premium commercial schemes. We fabricate entrance doors, commercial doors with Uw from 1.2, shopfronts, curtain walling to BS EN 13830 with Ucw from 0.6, plus roof lanterns and flat rooflights to bring light into deep-plan spaces.

Curtain walling and shopfront packages are fabricated to your engineer's drawings and supplied as finished units ready to install. Where heritage detailing matters on a conservation-sensitive elevation, we can match slimmer profiles and traditional sightlines in thermally broken aluminium. Browse the full range on our aluminium products pages, including aluminium curtain walling, and send the schedule when you are ready.

How trade accounts work

Open a trade account and the process is the same every time. Send your drawings and sizes, we specify the right system for the opening, quote it and fabricate the finished units. Pricing and lead times are confirmed per project at quote, so the figure you get back is for your actual schedule, not a rough guide.

We hold PAS 24 routes, work to BS EN 14351-1 and support UKCA marking and Declarations of Performance, and we are a Council for Aluminium in Building member. If you want to know the achievable U-value or finish before committing, ask and we will confirm it against the specification. Apply to open a trade account or start a quote to get moving.

If a homeowner in Wilmslow or Alderley Edge has come across us directly, we point them to a vetted local installer through find an installer. We keep our side of the line clean: we supply the trade, the trade looks after the client.

Common questions

Where is VitrineAlu based and do you cover Wilmslow and Alderley Edge?

We fabricate in Haydock, St Helens, Merseyside, and supply the trade working across Wilmslow, Alderley Edge, Prestbury and Mobberley. Finished units are ready for collection from Haydock or delivery into the area.

Do you install the aluminium you supply?

No. We are a trade fabricator and supplier only. We make the finished units and the installer, builder or main contractor manages their own installation. We never fit on site.

Can a homeowner in Alderley Edge buy direct?

We supply the trade rather than homeowners directly. If you are a homeowner, we will refer you to a vetted local installer through our find an installer route, and they handle supply and fitting.

How do I get a price and lead time?

Open a trade account and send your drawings and sizes. We specify the right system, then confirm pricing and lead time per project at quote so the figures match your actual schedule rather than a generic estimate.

What U-values can you achieve on high-spec homes?

It depends on the product and system. As starting points where specified, bifolds from 0.9, sliding from 1.0, casements from 0.85 and tilt-and-turn from 0.66. We confirm the whole-unit Uw per finished unit at quote.

Completed North West new build with VitrineAlu anthracite aluminium bifold doors, windows and dormers — The frame disappears, the view does the talking.

Proof, not promises

Specified and made by people who have fitted it

Paul Fradley, Director and Technical Lead, has worked almost every role in windows and doors across more than twenty years: surveyed, fabricated on the floor, fitted on site, then ran the technical and operations side. He leads the spec on every project, so what we quote is what we fabricate.

4.5 / 5 from 20 Google reviews. Council for Aluminium in Building member. Tested to BS EN 14351-1 and BS EN 13830 where specified.

Work with us

Send the drawings. We specify, fabricate and hand it over.

Send drawings Open a trade account