Trade supply

Aluminium Trade Supplier for Liverpool

VitrineAlu is a trade aluminium fabricator in Haydock, St Helens, a short run up the East Lancs Road from Liverpool. We make thermally broken aluminium windows, doors and glazed screens and supply them to Liverpool installers, builders, joiners and contractors. You send the drawings and sizes, we specify the right route and quote, fabricate the units and have them ready to collect or delivered into the Liverpool area. See the full aluminium product range we supply to the trade.

Trade quote Open a trade account

Lead time confirmed at quote, never a guess. Pricing per project, never a stock figure.

Aluminium Trade Supplier for Liverpool, aluminium fabricated and supplied by VitrineAlu

Trade supply, drawing-ledSend drawings or sizes and we specify and quote the right route.

Fabricated in HaydockCollection from the Haydock unit, or delivery within about an hour, roughly forty miles, across the North West.

Product-tested routesPAS 24 routes, BS EN 14351-1, UKCA / DoP support.

Built for Liverpool trade buyers

We supply the people doing the work, not the homeowner. If you are an installer fitting out a terrace in Aigburth, a builder on a new-build scheme in Liverpool Waters, a joiner taking on a rear extension in Allerton or a commercial fit-out team in the city centre, you are exactly who we fabricate for. You manage the install and the client relationship. We handle the aluminium.

Haydock sits roughly half an hour from most of Liverpool on a clear run, so collection from our unit is straightforward once units are made, and we can arrange delivery into the Liverpool area on larger orders. Lead times and delivery are confirmed per project when we quote, so you get a date you can plan a fit around rather than a guess.

The aluminium range we supply

We fabricate the full fenestration range in thermally broken aluminium, so most Liverpool jobs can be sourced from one supplier rather than chasing three.

Whole-unit performance is strong where the spec calls for it. Bifolds carry a Uw from 0.9 W/m2K, sliding doors from 1.0, casement windows from 0.85 and tilt-and-turn from 0.66, all as starting points confirmed per finished unit at quote. Acoustic performance to Rw 46 dB is available where specified, which matters on busier Liverpool roads and flats near the docks.

Aluminium bifold doors and slim sliding or patio doors
Casement and tilt-and-turn windows
Aluminium entrance doors and steel-look internal doors and screens
Commercial doors, shopfronts and curtain walling
Roof lanterns, flat rooflights and heritage profiles

Drawing-led quoting

Send us your drawings, a schedule or even rough sizes and openings, and we specify the right product route for the job. Glazing is accommodated from 22mm to 58mm depending on system, so we match the unit to your glass spec and the performance the project needs rather than forcing the job to fit one product.

Where security or compliance is in scope we quote to PAS 24 security routes and work to BS EN 14351-1 for windows and doors and BS EN 13830 for curtain walling, with UKCA and Declaration of Performance support. If you want to sanity-check sizes or thermal numbers before you send drawings, the maximum sizes guide and the U-values guide are a good start. Pricing is confirmed per project when we quote, never a stock figure.

When the spec is settled, send it through the trade quote request and we will come back with the route and the numbers.

Opening a trade account

Regular Liverpool buyers work with us on a trade account, which keeps quoting and repeat orders quick once we know how you work. As a Council for Aluminium in Building member, we are set up to supply trade properly rather than dabble.

Apply through open a trade account and we will get you set up. One supplier for bifolds, sliders, windows, screens and commercial work across your Liverpool jobs.

Homeowners in Liverpool

We do not sell direct to homeowners and we do not install. If you are a Liverpool homeowner who has found this page, the right next step is our find an installer route, which points you to a vetted local installer who can survey, fit and look after the job. Your installer then sources the aluminium from us, so you still get the same fabrication and the same standards behind the units.

Common questions

Do you supply aluminium to trade buyers across Liverpool?

Yes. We fabricate in Haydock, St Helens and supply installers, builders, joiners and contractors across Liverpool and the wider North West. You send drawings or sizes, we specify, quote and make the units for collection or delivery.

Can I collect from Haydock or do you deliver into Liverpool?

Both. Our unit in Haydock is about half an hour from most of Liverpool, so collection is straightforward once units are made, and we arrange delivery into the Liverpool area on larger orders. Collection and delivery options are confirmed when we quote.

Do you sell aluminium windows and doors direct to Liverpool homeowners?

No. We are a trade supplier and we never install. Homeowners are routed to a vetted local installer through our find an installer route, and that installer sources the aluminium from us.

What aluminium products can you supply for a Liverpool job?

The full range in thermally broken aluminium: bifold doors, sliding and patio doors, casement and tilt-and-turn windows, entrance and steel-look internal doors, commercial doors, shopfronts, curtain walling, roof lanterns and heritage. See the product range.

How do I get a price for a Liverpool project?

Send your drawings, schedule or sizes through the quote request and we specify the right product route and quote it. Pricing and lead times are confirmed per project, never a stock figure. Regular buyers can open a trade account.

Completed North West new build with VitrineAlu anthracite aluminium bifold doors, windows and dormers — The frame disappears, the view does the talking.

Proof, not promises

Specified and made by people who have fitted it

Paul Fradley, Director and Technical Lead, has worked almost every role in windows and doors across more than twenty years: surveyed, fabricated on the floor, fitted on site, then ran the technical and operations side. He leads the spec on every project, so what we quote is what we fabricate.

4.5 / 5 from 20 Google reviews. Council for Aluminium in Building member. Tested to BS EN 14351-1 and BS EN 13830 where specified.

Work with us

Send the drawings. We specify, fabricate and hand it over.

Send drawings Open a trade account