Trade supply

Aluminium Trade Supplier for Chester

VitrineAlu fabricates aluminium windows and doors in Haydock, St Helens, and supplies the trade working across Chester and the surrounding villages. Send us your drawings and sizes and we specify the route, quote and fabricate finished units for collection or delivery into the area. Installers, builders and shopfitters run the job. See our aluminium product range.

Trade quote Open a trade account

Lead time confirmed at quote, never a guess. Pricing per project, never a stock figure.

Aluminium Trade Supplier for Chester, aluminium fabricated and supplied by VitrineAlu

Trade supply, drawing-ledSend drawings or sizes and we specify and quote the right route.

Fabricated in HaydockCollection from the Haydock unit, or delivery within about an hour, roughly forty miles, across the North West.

Product-tested routesPAS 24 routes, BS EN 14351-1, UKCA / DoP support.

Aluminium supply for the trade working in Chester

Chester carries a particular mix of work. There are the high-spec rear extensions and full remodels on the larger plots around the city and the villages out towards the river, period and conservation-area properties inside the walls and along the older terraces, and a steady run of commercial fit-outs across the retail core, the business parks and the professional offices near the racecourse. Each of those jobs asks something different from aluminium, and we fabricate to suit the brief rather than to a single house style.

We work to drawings. A builder or installer sends sizes, elevations and the finish schedule, we confirm the right system for the opening, glazing weights and thermal target, then we fabricate and supply the finished units. You manage the survey, the install and the client. We stay on the supply side, which means no channel conflict on your own contracts and a clear line back to us if anything needs checking.

Everything ships from our unit in Haydock, a straightforward run up the motorway into Chester, so delivery into the area and collection from us are both easy to plan around your programme.

Heritage-look aluminium for period and conservation properties

A lot of the residential work in and around Chester sits in conservation areas or involves period frontages where the glazing has to read right. We fabricate slim, steel-look aluminium for exactly this, thermally broken sections that hold fine sightlines while still meeting modern performance. It suits steel-look replacements, internal steel-look screens and doors that divide a kitchen or hallway without closing it off, and replacement casements where the original look matters.

Where a property needs a contemporary intervention behind a traditional front, the heritage range pairs cleanly with our wider window and door range so the back of the house can open up while the street elevation stays sympathetic. Tell us the constraints on the job and we will specify accordingly.

Steel-look internal doors and screens for room division and glazed partitions
Slim heritage casements and replacement windows for period elevations
Thermally broken sections that meet current performance without a heavy frame

Big glass and slim sightlines for high-end residential

On the larger Chester plots and the open-plan extensions, the brief is usually maximum glass and minimum frame. We fabricate aluminium bifold and sliding doors built around big panes and low U-values, with finishes specified to match the rest of the project. Where the trade needs a single large pane to read as a wall of glass, the sliding route carries the weight; where the opening needs to fold fully away, the bifold route does it.

Across the range we can specify thermally broken aluminium with low whole-unit figures where the system and glazing allow, bifold Uw from 0.9 and sliding from 1.0 where specified, with the achievable figure confirmed per finished unit at quote. Acoustic and security routes, including PAS 24, are available where the project calls for them.

Aluminium bifold doors for openings that need to fold fully clear
Sliding and patio doors for large fixed panes and slim interliner sightlines
Casement and tilt-and-turn windows specified to match the glazing line

Commercial curtain walling and shopfronts

Chester's commercial work, shop and restaurant fit-outs in the centre, offices and units on the surrounding parks, asks for aluminium that performs and looks right at scale. We fabricate curtain walling, commercial entrance doors and shopfront screens for shopfitters, main contractors and specifiers working in and around the city.

Curtain walling is supplied to BS EN 13830 with Ucw from 0.6 where specified, and commercial doors to BS EN 14351-1 with Uw from 1.2. We support UKCA marking and Declaration of Performance where the project requires it, and as a Council for Aluminium in Building member we fabricate to recognised standards throughout. See our curtain walling page for the commercial detail.

How to work with us

Open a trade account and you get a single point of contact, drawings-based quoting and finished aluminium supplied to your programme. If you are a homeowner in Chester rather than a trade buyer, we will point you to a vetted local installer instead.

Send us the job and we will specify the right route, generic and neutral on systems, and quote it properly. Pricing and lead times are confirmed per project at quote.

Trade buyers: open an account at /installing/apply and send drawings to /quote
Homeowners: find a vetted installer for your project at /find-an-installer
Browse the full range and technical guidance at /products and /guides

Common questions

Where is VitrineAlu based and how does supply into Chester work?

We fabricate at our unit in Haydock, St Helens, Merseyside, and supply finished aluminium to the trade working across Chester and the surrounding area. It is a short motorway run, so we deliver into the area or you collect from Haydock, whichever suits your programme.

Do you install in Chester?

No. VitrineAlu fabricates and supplies aluminium to the trade only. Installers, builders and contractors handle survey and installation. If you are a homeowner, we will refer you to a vetted local installer via our find-an-installer page.

Can you supply heritage-look aluminium for conservation-area properties in Chester?

Yes. We fabricate slim, steel-look thermally broken aluminium for period and conservation work, including internal screens, steel-look doors and heritage casements, specified to suit the elevation and the constraints on the job.

Do you supply curtain walling and shopfronts for commercial projects?

Yes. We fabricate curtain walling to BS EN 13830, commercial entrance doors to BS EN 14351-1 and shopfront screens for contractors, shopfitters and specifiers, with UKCA and Declaration of Performance support where the project requires it.

How do I get a price and a lead time?

Open a trade account and send your drawings and sizes through the quote page. We confirm the right system, then quote the units. Pricing and lead times are confirmed per project at quote rather than quoted as a fixed figure up front.

Completed North West new build with VitrineAlu anthracite aluminium bifold doors, windows and dormers — The frame disappears, the view does the talking.

Proof, not promises

Specified and made by people who have fitted it

Paul Fradley, Director and Technical Lead, has worked almost every role in windows and doors across more than twenty years: surveyed, fabricated on the floor, fitted on site, then ran the technical and operations side. He leads the spec on every project, so what we quote is what we fabricate.

4.5 / 5 from 20 Google reviews. Council for Aluminium in Building member. Tested to BS EN 14351-1 and BS EN 13830 where specified.

Work with us

Send the drawings. We specify, fabricate and hand it over.

Send drawings Open a trade account